FAQs
Shimmerwalls Product
How do you hang a shimmer wall?
To hang a Shimmerwall, set up your pipe and drape stand so it is firm and sturdy, and then use cable ties to attach the top row of sequin panels to the top horizontal bar. Make sure this top row of panels is slightly raised above the horizontal top bar, to cover up the pipe and drape. For more information, see our in-depth blog post here.
Creation and Installation
WHAT ARE THE DIMENSIONS OF THE SEQUIN PANELS
Our 15mm "S15" sequin boards measure 24.8cm x 24.8cm (9¾ inches x 9¾ inches), therefore 16 boards cover literally 1m2 (1.09 sq.yds). Each panel also has a choice of sequin size, 30mm (1⅜") and 15mm (⅝"). There are 64pcs of 30mm sequins on each board and 256pcs of 15mm sequins on each panel.
Our 30mm "S30" sequin boards measure 24.8cm x 24.8cm (9¾ inches x 9¾ inches), therefore 16 boards cover literally 1m2 (1.09 sq.yds). We have a choice of two board colours, black or transparent and can also custom paint to any Pantone or RAL colour, subject to a modest extra charge. Each board also has a choice of sequin size, 30mm (1⅜") and 15mm (⅝"). There are 64pcs of 30mm sequins on each board and 256pcs of 15mm sequins on each board.
Our 100mm (3⅘") "S98" jumbo sequin boards measure 30cm x 30cm (11¾ inches x 11¾ inches). 9 boards therefore cover an area 90cm x 90cm, or just under 1 sq. yard. We stock black boards as standard but also custom paint or injection mould to any Pantone or RAL colour, subject to a modest extra charge. Each board has 9pcs of 98x98mm (3⅘") square format sequins on each board. These jumbo sequins can be manufactured from light weight acrylic or aluminium sheet, depending on your requirements. You can also get creative with this larger format, with diamond and other shapes in a variety of sizes, especially in acrylic which we laser cut to your design.
Our 30mm "S30" sequin boards measure 24.8cm x 24.8cm (9¾ inches x 9¾ inches), therefore 16 boards cover literally 1m2 (1.09 sq.yds). We have a choice of two board colours, black or transparent and can also custom paint to any Pantone or RAL colour, subject to a modest extra charge. Each board also has a choice of sequin size, 30mm (1⅜") and 15mm (⅝"). There are 64pcs of 30mm sequins on each board and 256pcs of 15mm sequins on each board.
Our 100mm (3⅘") "S98" jumbo sequin boards measure 30cm x 30cm (11¾ inches x 11¾ inches). 9 boards therefore cover an area 90cm x 90cm, or just under 1 sq. yard. We stock black boards as standard but also custom paint or injection mould to any Pantone or RAL colour, subject to a modest extra charge. Each board has 9pcs of 98x98mm (3⅘") square format sequins on each board. These jumbo sequins can be manufactured from light weight acrylic or aluminium sheet, depending on your requirements. You can also get creative with this larger format, with diamond and other shapes in a variety of sizes, especially in acrylic which we laser cut to your design.
Can I just buy sequins?
We can replace sequins from your Shimmerwall free of charge, however if you would like another colour, please complete the contact form and we'll send you a quote.
What are your VARIOUS sequin sizes?
Our Standard 30mm (1⅜") sequins are manufactured from specially developed PET or PVC metallized foil and hang on our S30 or ShimmerClick panels. They are best used for single colour, patterned or simple Shimmerwall displays.
Our Micro 15mm (⅝") diameter sequins are manufactured from specially developed PET or PVC metallized foil and allow you to make a finely detailed logo or artwork using sequins. They hang on our S15 tiles/boards. They are also favoured by luxury brands for use in visual merchandising.
Our 100mm (3⅘") large format sequins are made from lightweight acrylic or anodized aluminium. These are cut by laser so are also available in a number of formats, typically squares or diamonds in various sizes. Have a look at our videos to get a better idea of what's possible.
Our Micro 15mm (⅝") diameter sequins are manufactured from specially developed PET or PVC metallized foil and allow you to make a finely detailed logo or artwork using sequins. They hang on our S15 tiles/boards. They are also favoured by luxury brands for use in visual merchandising.
Our 100mm (3⅘") large format sequins are made from lightweight acrylic or anodized aluminium. These are cut by laser so are also available in a number of formats, typically squares or diamonds in various sizes. Have a look at our videos to get a better idea of what's possible.
CAN I USE SEQUINS I HAVEN'T BOUGHT FROM SHIMMERWALLS?
Unfortunately, not. Our sequins are specially designed to hang on the posts of our boards. The teardrop hole ensures they do not fall off even in high winds if placed outside.
What is the difference between black boards and transparent boards?
There is no physical difference between our black and transparent boards apart from colour.
We make 2 standard options available to you as they give you the ability to create a completely different visual look. Black boards silhouette lighter sequins well, making the colour of the sequins stand our more, whilst also darkening your wall in general. Transparent boards allow you to use a contrasting colour on the wall behind the sequins which, if the colour is similar (or contrasting) to the colour of your sequins, can give a really beautiful effect.
We also paint or injection mould boards to your exact Pantone or RAL colour for a modest additional charge. Gold sequins on gold boards or silver sequins on silver boards are a particularly popular request.
We make 2 standard options available to you as they give you the ability to create a completely different visual look. Black boards silhouette lighter sequins well, making the colour of the sequins stand our more, whilst also darkening your wall in general. Transparent boards allow you to use a contrasting colour on the wall behind the sequins which, if the colour is similar (or contrasting) to the colour of your sequins, can give a really beautiful effect.
We also paint or injection mould boards to your exact Pantone or RAL colour for a modest additional charge. Gold sequins on gold boards or silver sequins on silver boards are a particularly popular request.
Can I hang my Shimmerwall sequin WALL outside? WILL IT degrade or FADE?
Please call and speak to us if you are looking to situate your sequin wall outside or in direct sunlight where UV radiation may cause issues. We can then talk through your specific need and specify the right sequin foil for your project.
For almost all of our colours, no problem. That said, if you plan on installing outside you must speak with us so we fully understand your installation, so we can ensure the right UV-tolerant product is ordered.
Our boards/tiles are injection moulded using a specially strong automotive-grade UV-tolerant polycarbonate manufactured by polymer experts Beyer Makrolon. This is tough enough to withstand both high and low temperatures as well as typical installation eventualities. Our boards have been specially designed to hold every sequin in place however high the wind blows and are suitable for interior and exterior use.
For most, BUT NOT ALL colours our standard sequins have been scientifically tested both outside in direct sunshine and under test lab UV-light simulated conditions with good results after many months. Certain colours however need to be specifically ordered and specified incorporating UV-inhibitors in our inks so you don't experience any problems with bleaching after many months exposure to UV/sunshine. It is therefore important to check with us first if you are considering a long-term external installation.
For almost all of our colours, no problem. That said, if you plan on installing outside you must speak with us so we fully understand your installation, so we can ensure the right UV-tolerant product is ordered.
Our boards/tiles are injection moulded using a specially strong automotive-grade UV-tolerant polycarbonate manufactured by polymer experts Beyer Makrolon. This is tough enough to withstand both high and low temperatures as well as typical installation eventualities. Our boards have been specially designed to hold every sequin in place however high the wind blows and are suitable for interior and exterior use.
For most, BUT NOT ALL colours our standard sequins have been scientifically tested both outside in direct sunshine and under test lab UV-light simulated conditions with good results after many months. Certain colours however need to be specifically ordered and specified incorporating UV-inhibitors in our inks so you don't experience any problems with bleaching after many months exposure to UV/sunshine. It is therefore important to check with us first if you are considering a long-term external installation.
Fans and Air Movement – What do you recommend?
Using a fan to create air movement will bring your Shimmerwall to life. Unless it is located outside, it just isn’t the same without a simple fan to bring it alive and catch attention!
We often get asked what fan to use for best results. The “best” result is of course completely variable based on what you or your client are seeking to achieve. Most fans have 2 or 3 levels of air force so they can be varied on site at the time of installation. We highly recommend a dry-run beforehand with a single Shimmerwall panel to test out.
If there is a focal point on the Shimmerwall (like a logo or symbol) then we would normally recommend one fan is used and it is pointed at the centre of the focal point to enhance it further. The sequins will then ripple out from that centre.
A single fan should be good for a wall up to approx. 10’ x 10’ (3000x3000mm)
If the Shimmerwall is a plain colour then multiple fans can be used to good effect on a larger wall (over 10’x10’) but we suggest the fan be turned down to a lower air flow setting so there are not multiple “hot” spots on the wall which would spoil the beauty of the wall.
Small fans can be surprisingly effective if they are able to be placed around 4 feet (1200mm) of your wall. A typical fan that has worked well for our clients is this.
There are many similar alternatives, just check carefully how they are powered. Some can also be USB powered which enables a USB Power Bank to be used in a temporary situation where there is no mains power. An ideal fan to position further away (between 6’ and 20’ (1800-5000mm) is something like a Honeywell HT900 which is reasonably quiet and only 11” (280mm) in diameter.
For significant multiple installations we are able to provide industrial quality fan solutions to order. These can also be track-mounted, thus attaching to existing lighting track. The above low-cost fans available at Amazon and other outlets across the World are however surprisingly effective and long-lasting.
We often get asked what fan to use for best results. The “best” result is of course completely variable based on what you or your client are seeking to achieve. Most fans have 2 or 3 levels of air force so they can be varied on site at the time of installation. We highly recommend a dry-run beforehand with a single Shimmerwall panel to test out.
If there is a focal point on the Shimmerwall (like a logo or symbol) then we would normally recommend one fan is used and it is pointed at the centre of the focal point to enhance it further. The sequins will then ripple out from that centre.
A single fan should be good for a wall up to approx. 10’ x 10’ (3000x3000mm)
If the Shimmerwall is a plain colour then multiple fans can be used to good effect on a larger wall (over 10’x10’) but we suggest the fan be turned down to a lower air flow setting so there are not multiple “hot” spots on the wall which would spoil the beauty of the wall.
Small fans can be surprisingly effective if they are able to be placed around 4 feet (1200mm) of your wall. A typical fan that has worked well for our clients is this.
There are many similar alternatives, just check carefully how they are powered. Some can also be USB powered which enables a USB Power Bank to be used in a temporary situation where there is no mains power. An ideal fan to position further away (between 6’ and 20’ (1800-5000mm) is something like a Honeywell HT900 which is reasonably quiet and only 11” (280mm) in diameter.
For significant multiple installations we are able to provide industrial quality fan solutions to order. These can also be track-mounted, thus attaching to existing lighting track. The above low-cost fans available at Amazon and other outlets across the World are however surprisingly effective and long-lasting.
cAN i CHOOSE THE COLOUR OF THE PANELS?
We have a choice of two panel colours, black or transparent and can also custom paint to any Pantone or RAL colour, subject to a modest extra charge.
Ordering
How do I make OR ORDER a Shimmerwall?
There are two easy ways..
1. Use our contact form which asks you the most important details about your project so we can deliver exactly what you require. We usually reply within 1-4 hours, however on busy days it might take up to 12. We will send you a quote for your desired project as well as a mock-up design so you can see what your Shimmerwall will look like!
2. Give us a call or email us at [email protected] with your design and we'll help you through the design and ordering process, taking care of absolutely everything including providing completely populated boards delivered right to your door.
1. Use our contact form which asks you the most important details about your project so we can deliver exactly what you require. We usually reply within 1-4 hours, however on busy days it might take up to 12. We will send you a quote for your desired project as well as a mock-up design so you can see what your Shimmerwall will look like!
2. Give us a call or email us at [email protected] with your design and we'll help you through the design and ordering process, taking care of absolutely everything including providing completely populated boards delivered right to your door.
I have heard you have a design app that simplifies the design process, can i use it?
If you have a design you need processing into a wall of sequins we do indeed have special software that has been developed by us to enable this quickly and effectively. We however only use this internally to upload your image and pixelate it for your approval. We also use it to produce planograms for our workshop to follow when they populate your sequin boards. If you wish to do the hard work populating sequins onto boards then we can provide the planograms to you as PDFs so you know where each sequin colour is placed on each board.
What are the requirements for SUBMITTING my image files?
Our software supports the most common .jpg, .png and .tif image file extensions. If your image is not supported by our system we will normally find a way to convert it.
What is a planogram?
A planogram is a pixelated PDF plan of your design that tells you all the important information, including guidance on assembling your panels in the correct order, as well as a complete visual of your wall.
IF I REALLY WANT TO DO IT THE HARD WAY, How long will it take FOR ME TO make up a Shimmerwall SEQUIN BY SEQUIN BY HAND?
This depends on the size of sequins you are using, how many colours you are using and how complicated your design is. Standard 30mm (⅝") sequins can be populated on our boards relatively quickly. Plain colours usually take around 1 hour per sq.M / 0.9 Sq. Yards. 1sq.M requires 16 boards. 15mm (1⅘") diameter sequins allow highly detailed pictures to be created, these typically take 8 hours to populate a square meter of sequins.
Can I reuse my boards and CHANGE THEM TO ANOTHER COLOUR SEQUIN OR DESIGN?
Yes! You can just order the extra sequins you need and re-populate yourself. We have designed the sequins so they can be pulled off the board posts and so the boards can be reused.
WILL YOU POPULATE ALL THE SEQUINS for me?
Of course! This is what most of our customers opt for. Our normal lead time is 7-10 days however we have often delivered large jobs in just a few days, to Europe, North America and Asia. If your requirement is really urgent then we'll do our very best to pull out all the stops and help.
Do you have a designer that can design a picture, DESIGN OR LOGO to my specification?
Yes, we have designers on our team who will be happy to help. Contact us or give us a call.
CAN I HANG MY SHIMMERWALL SEQUIN WALL OUTSIDE? WILL IT DEGRADE OR FADE?
It is important you call and speak to us if you are looking to situate your sequin wall outside or in direct sunlight where UV radiation may cause issues. We can then talk through your specific need and specify the right sequin foil for your project.
For almost all of our colours, no problem. That said, if you plan on installing outside you must speak with us so we fully understand your installation, so we can ensure the right UV-tolerant product is ordered...
Our boards/tiles are injection moulded using a specially strong automotive-grade UV-tolerant polycarbonate manufactured by polymer experts Beyer Makrolon. This is tough enough to withstand both high and low temperatures as well as typical installation eventualities. Our boards have been specially designed to hold every sequin in place however high the wind blows and are suitable for interior and exterior use.
For most, BUT NOT ALL colours our standard sequins have been scientifically tested both outside in direct sunshine and under test lab UV-light simulated conditions with good results after many months. Certain colours however need to be specifically ordered and specified incorporating UV-inhibitors in our inks so you don't experience any problems with bleaching after many months exposure to UV/sunshine. It is therefore important to check with us first if you are considering a long-term external installation.
For almost all of our colours, no problem. That said, if you plan on installing outside you must speak with us so we fully understand your installation, so we can ensure the right UV-tolerant product is ordered...
Our boards/tiles are injection moulded using a specially strong automotive-grade UV-tolerant polycarbonate manufactured by polymer experts Beyer Makrolon. This is tough enough to withstand both high and low temperatures as well as typical installation eventualities. Our boards have been specially designed to hold every sequin in place however high the wind blows and are suitable for interior and exterior use.
For most, BUT NOT ALL colours our standard sequins have been scientifically tested both outside in direct sunshine and under test lab UV-light simulated conditions with good results after many months. Certain colours however need to be specifically ordered and specified incorporating UV-inhibitors in our inks so you don't experience any problems with bleaching after many months exposure to UV/sunshine. It is therefore important to check with us first if you are considering a long-term external installation.
Delivery
DO YOU DELIVER TO MY COUNTRY?
Yes, we have partnered with DHL, TNT and FedEx which allow us to deliver all over the world in a matter of days. If you are in the EU, USA, Canada, Hong Kong, China, Australia or New Zealand we take care of all customs clearances, delivery costs and duties (if applicable) so you don't need to worry about a thing. For other countries including those in the Middle East we can make special arrangements to make your delivery as hassle-free as possible.
ARE YOU ABLE TO DELIVER TO MULTIPLE LOCATIONS? I NEED DIRECT DELIVERY TO 50 STORES.
Of course! We are experienced in delivering complete ready-to-go kits to multiple locations, complete with all the recipient may need to make a hassle-free installation
DO YOU HAVE A MINIMUM ORDER QUANTITY
Not specifically, we are happy to work with customers large and small.
Please ask us for a quotation.
Please ask us for a quotation.